Oil & Gas · Refineries · Processing · Pipelines

Oil and gas electronics repair — UK

When control electronics fail in a refinery, processing plant, or compressor station, every hour of downtime costs. Northern Power Electronics repairs drives, control boards, instrumentation electronics, and power systems at component level — fast, warranted, and with full ISO 9001 documentation.

ISO 9001 & 14001 Certified Component-Level PCB Repair 1–3 Day Emergency Service NOF Member UK-Based Newcastle Workshop
Request a Free Assessment Call 0800 001 6045
ISO 9001 Certified ISO 14001 Certified NOF Member
Oil and gas electronics repair — Northern Power Electronics Ltd, Newcastle upon Tyne
What we repair for oil and gas
Component-level repair for refinery control systems, process electronics, drives, and power equipment
Drives & Motion
  • AC & DC variable speed drives
  • Pump and compressor drive electronics
  • Soft starters
  • Motor control boards
  • Governor control electronics
Control & Instrumentation
  • PLC and DCS control boards
  • SCADA and telemetry electronics
  • Flow computer electronics
  • Process controller PCBs
  • Gas analyser and transmitter boards
Power Electronics
  • Industrial power supply units (PSUs)
  • Switch-mode power supplies
  • UPS system electronics
  • Rectifiers & converters
  • Distribution control boards
Safety & Monitoring
  • Fire & gas detection electronics
  • Emergency shutdown system boards
  • Burner management system electronics
  • Safety relay and protection circuits
  • Alarm and control panel PCBs
Why oil and gas operators choose repair over replacement
Process downtime in refineries and gas plants is expensive. Legacy control electronics may no longer be available new — or carry lead times that are simply unacceptable.

Reduces process downtime

Component-level repair is faster than sourcing new equipment through long industrial supply chains. We assess within 1–3 working days of receipt.

Obsolete control electronics

We specialise in legacy PLC boards, DCS modules, and process controllers no longer supported by the OEM. If it can be repaired, we repair it.

Lower cost

Repair typically costs 20–60% of replacement — with no reconfiguration, recommissioning, or revalidation of process settings required.

NOF member

Northern Power Electronics is a registered NOF Energy member — a recognised supplier to the oil and gas industry supply chain.

Full documentation

ISO 9001 certified — every repair is documented and traceable. Suitable for regulated environments requiring full audit trails.

Oil and gas brands we repair
Including obsolete and discontinued equipment where OEM support no longer exists
ABB
Siemens
Schneider Electric
Emerson / Rosemount
Yokogawa
Honeywell
Rockwell / Allen Bradley
Woodward
Endress+Hauser
Pepperl+Fuchs
Phoenix Contact
Eurotherm
Control Techniques
Parker SSD
TDK-Lambda
Lenze
Frequently asked questions
Do you repair electronics used in oil and gas refineries and processing plants?
Yes. Northern Power Electronics repairs control systems, drives, power electronics, and instrumentation boards used in oil and gas refineries, processing plants, compressor stations, and pipelines across the UK. We accept equipment by secure courier and return it fully tested under a 12-month warranty. Based in Newcastle upon Tyne. ISO 9001 certified. NOF Energy member.
Can you repair obsolete oil and gas control electronics?
Yes. Legacy control electronics in oil and gas facilities are frequently discontinued by the original manufacturer. We repair at component level — restoring the original board rather than substituting assemblies. This includes PLC boards, DCS modules, flow computer electronics, and process controllers that OEMs no longer support, using specialist diagnostic equipment including the ABI BoardMaster.
How quickly can you repair oil and gas electronics?
Initial assessment is completed within 1–3 working days of receiving equipment. Emergency turnaround is available for critical process electronics — call us directly on 0800 001 6045 to discuss urgent requirements. Most standard repairs are completed within 5–10 working days depending on fault complexity and parts availability.
Are you a recognised supplier to the oil and gas industry?
Yes. Northern Power Electronics Ltd holds ISO 9001 quality management and ISO 14001 environmental management certification. We are a NOF Energy member — recognised across the oil and gas supply chain. Every repair is fully documented and traceable, making us suitable for regulated environments requiring full audit trails.
Do you repair variable frequency drives used in oil and gas applications?
Yes. We repair AC and DC variable speed drives, soft starters, and motor control electronics used on pumps, compressors, fans, and conveyors in oil and gas facilities. We work on drives from ABB, Siemens, Schneider Electric, Emerson, Control Techniques, and other manufacturers — including obsolete models where OEM support has ended.
Do you offer a warranty on oil and gas electronics repairs?
Yes. A 12-month warranty is available on qualifying repairs. All work is carried out under our ISO 9001 quality management system, with full documentation provided for compliance and audit purposes.

Oil and gas electronics that need repair?

Send us your equipment for a free assessment. Clear quote, fast turnaround, no obligation.

Request a Free Assessment

A worker taking readings of industrial gas equipment